In-Plant Electrical Works

A complete design and installation of electrical system for ≤10MVA, ≤34.5kV, 3Ph [3-Wire or 4-Wire or 5-Wire] capacity.

  1. Medium Voltage Switchgear
  2. Low Voltage Switchgear
  3. Automatic Transfer Switch
  4. Generator Breaker
  5. Tie Breaker               
  6. Motor Control Center
  7. Capacitor Bank
  8. Main Distribution Panel         
  9. Enclosed Circuit Breaker
  10. Panel Board

Liberty Commercial Complex Central Mall
400V Low Voltage Switchgear with ATS
For 2x2MVA Indoor Substation
Date completed:  August 5, 2015

JG Summit Petrochemical Corporation
2.5MVA, 6.6kV – 0.48kV, 3Ph, 60Hz, Power Substation
For New Laboratory Building
Completed

Local Government Unit – Samar
3x250kVA, 13.2kV – 0.23kV, 3Ph, 60Hz
Remote Substation
For San Juanico Bridge Aesthetic Lights
Completed

Veterans Memorial Medical Center [VMMC]
North Avenue, Diliman, Quezon City Philippines
5MVA [k-20], 34.5kV – 2.4kV, 3Ph, 60Hz
1.5MVA [k-20], 2.4kV – 0.48kV, 3Ph, 60Hz
1MVA [k-20], 2.4kV – 0.48kV, 3Ph, 60Hz
Status:  On-going

Coca-Cola Bottlers Philippines, Inc.
Meycauayan, Bulacan
Power and Main Distribution Panel for Line II Project
Date Completed:  1995/1996

Bangko Sentral ng Pilipinas
Davao Regional Office, Davao City
Replacement of 13.2kV Medium Voltage Switchgear and
2 x 1MVA Power Transformer, 13.2kV – 0.4kV, 3Ph, 60Hz
Date Completed: August 17, 2021

Asian Development Bank
Substation 4 EDSA Side
Replacement of 1 x 1.75MVA Cast Resin Transformer,
34.5kV – 0.4kV/0.23kV, 3Ph, 60Hz
Date Completed: August 07, 2021

SM Mall
Tuguegarao, Cagayan
2MVA,13.8kV-480V, 3Ph, 60Hz Substation
Completed

Robinsons Place Mall
Calasiao, Pangasinan
Substation Equipment
Date Completed:  November 25, 2013

Top